Ivoclar Programat EP 3010 G2 Firing and Pressing Furnace

With colour touch display and membrane keyboard. In addition to the Ivoclar Vivadent programs already installed, 300 individual programs are available.

• Fully automatic pressing function (FPF) for excellent pressing results;
• Electronic pressing drive with force sensor for precise control of the pressing stamp in the micrometre range, no compressed air connection necessary;
• Crack Detection System (CDS) immediately interrupts the pressing process if a crack is detected in the investment ring;
• QTK2 heating muffle with SiC base reflector for homogeneous heat distribution and excellent pressing and firing results;
• Automatic temperature calibration (ATK2) via two reference points enables highly accurate calibration;
• Optical status display (OSD) provides information about the current operating status by means of different colours;
• Energy-saving technology enables up to 40 % power savings in standby mode;
• Power Fail Save System bridges short-term power failures of up to 10 seconds;
• Integrated maintenance and test programs;
• IoT connection;
• Software updates via USB stick.

• 32.0 x 46.5 x 55.0 cm without tray, 39.0 x 46.5 x 55.0 cm with tray; 200-240 V, 50/60 Hz; power consumption max. 8.5 A; firing temperature max. 1200 °C; firing chamber ø 90 mm, height 80 mm; USB connection; 18.3 kg.

• • Programat EP 3010 G2 complete with mains cable; vacuum hose; firing tray; SiC firing table; tong holder; investment ring cooling tray, firing tray kit 2; automatic temperature control set ATK2 (test set); USB download cable; USB stick and various accessories.

Ask about this product